These instructions will show you how to set up Panopto to record the mic and system audio simultaneously.

Setting System Audio Up

To record System Audio, and a microphone source simultaneously in Panopto’s Windows Recorder open the Control Panel, and navigate to “Hardware and Sound” and click “Sound” – this dialog box should appear:

If “Speakers” are not currently set as the default playback device set them to default now.

Click the “Recording” tab.

If “Stereo Mix” is not one of the options under the “Recording” tab – right click, and select “Show Disabled Devices” so that it is active.

Enable “Stereo Mix”

Set “Stereo Mix” to default device, and the Microphone that will be used for recording in Panopto to “Default Communications Device”

Right click the Microphone that will be used for recording, and click “Properties”

Under the “Listen” tab enable “Listen to this device” and click OK.

Recording

Open the Panopto Recorder application.

Set the Primary Source Audio to Stereo Mix

The Panopto Recorder will now capture System Audio, and the Microphone source simultaneously!